How to Network Windows 7, Vista, and XP Computers > Verify that You're Using NTFS on Your Hard Drives. Back when Vista was the hot topic, we wrote an article on how to network Vista and XP computers together. Now we have another Windows version. Like many of us, you'll likely have an older XP and/or Vista machine waiting when you bring home a new preloaded PC or an upgrade copy of Windows 7.

How to Network Windows 7, Vista, and XP Computers > Verify that You're Using NTFS on Your Hard Drives. Back when Vista was the hot topic, we wrote an article on how to network Vista and XP computers together. Now we have another Windows version. Like many of us, you'll likely have an older XP and/or Vista machine waiting when you bring home a new preloaded PC or an upgrade copy of Windows 7.

To convert or change raw file system to NTFS, EaseUS Data Recovery can easily recover files from RAW hard disk drive and then you can format the RAW drive to NTFS. EaseUS Partition Master can FREE Convert FAT/FAT32 to NTFS file system under Windows 2000/XP/Vista/Windows 7/8 and Windows Server 2000/2003/2008 fast and safely. Backup data first, if possible. I am not responsible.

Free raw to ntfs cnverter iCare Recovery Pro Free Edition is to repair fix RAW drive when hard disk phone memory card usb flash drive reports raw blank or raw file. This article explains exactly how you can achieve seamless transition from FAT32 to NTFS without formatting or worrying about data loss. There are two options to change a hard drive from FAT32. You can use the Convert.exe command from a command prompt in the Windows Operating System (OS) or. AOMEI NTFS to FAT32 Converter (Ntfs2Fat32) helps users to convert NTFS to FAT32 directly and safely (the product from AOMEI Technology). Besides, it can be used well.

Although you might be able to just boot up Windows 7 and all computers automatically can see each other, sometimes you can run into problems. So in this article we'll review a few things about each of the computers. Soon you'll have them all talking with each other, sharing files, printers, and media. Verify that You're Using NTFS on Your Hard Drives.

As discussed previously, your older PCs might be using a less- secure file system: FAT3. Thus you should make sure you're using NTFS (New Technology File System). You can refer to the previous article (starting with the fourth full paragraph down) to discover the current file system and to convert it if necessary. Ensure that File and Printer Sharing Is Enabled.

Although Windows automatically installs and enables the protocol for file and printer sharing, it can be accidentally disabled. Thus you should double- check it, especially if you're currently having sharing problems. On the network connection's properties dialog (see Figure 1) you want to make sure the File and Printer Sharing for Microsoft Networks and Client for Microsoft Networks protocols are enabled. To get to the Properties dialog of a network connection in XP, click Start > Connect to> Show all connections. Then right- click the network connection you're using and select Properties.

Here's how to get there in Vista: open the Network and Sharing Center and click the Manage network connections link on the left pane. Then right- click the network connection and select Properties. In Windows 7, open the Network and Sharing Center, click the desired connection name link in the active networks area. On the connection status windows, click the Properties button. Disable the Simple or Wizard File- Sharing Interface. Windows XP Professional and all editions of Vista and Windows 7 have advanced sharing settings. When you use the advanced method, you can better control sharing using Permissions.

You'll be using a similar approach among your computers, regardless of their Windows version. Here's how to disable the simple or wizard- based sharing interface: Open Computer or My Computer. Click Tools and select Folder Options. You should have all the computers that you want to share with each other set to the same group. Because some Windows versions have different default workgroup names, you should decide on a particular name and verify that each computer is set to the same.

To find the current Workgroup of a Windows XP, Vista, or Windows 7 machine, right- click the My Computer or Computer shortcut from the desktop or start menu and select Properties. You'll see the computer name, domain, and workgroup setting on the System window. While you're at it, you can also verify that you have descriptive computer names, so you can tell which PC is which when you browse the network.

How to Convert RAW to NTFS in Windows 7/8/1. External Hard Drive. Summary: Have you ever encountered this problem: file system is RAW how to fix it? If you have experienced this issue, don't be panic.

This post will offer some effective methods to recover files from the RAW partition and then convert RAW to NTFS in Windows 7/8/1. I don’t care for what is inside (only one word file) but I just want to be able to use it again. Is there anyway I can format the HDD and make it usable again? Do you know what RAW is? Generally speaking, RAW refers to a file system which is not formatted by NT file system, such as NTFS and FAT. Actually, RAW issue is very common and it often occurs on many storage devices, such as hard disk, external hard drive, USB flash drive, SD card and more. If no file system exists on a device, there can be no files or folders on this device, namely RAW partition can't be used to store data before it is formatted.

In a word, once your disk becomes RAW, it is not allowed to access the target partition. The following figure shows you RAW drive in Disk Management. If your partition adopts NTFS file system before, but now it becomes RAW in Windows 7/8/1.

Usually, some files or folders are saved on your external hard drive or other devices. In this case, you may ask: why file system is RAW? What should you do to convert RAW to NTFS or get data back from this RAW partition? Please keep reading to find the answers. In general, the causes for this issue can be various in Windows 7/8/1. If your hard drive turns RAW file system due to virus attack, it is possible that some parameters and information are changed/deleted.

Partition table damage: this reason is very common. If partition table is damaged, the whole hard disk probably becomes RAW since Windows identifies partitions by the partition table. Bad sectors: perhaps there are some bad sectors on your external hard drive, and then RAW issue happens. Operating system reinstallation: it is likely that your disk is RAW after OS reinstallation.

This is because the OS doesn’t update in time, then Windows doesn't support the file system. File system structural damage. Physically damage on hard drive.

Unexpected power outage when using the computer. More other unknown factors.

And then due to different causes, the solutions to convert RAW to NTFS are also different. In this post, I will introduce you how to fix RAW hard drive to NTFS in different cases. Once partition table on your external hard drive gets corrupted or damaged, Windows will fail to read this disk for any reason, and it reports your disk as RAW. Although the data is still there, the RAW partition is unable to be accessed. In this case, data recovery should be the first thing in Windows 7/8/1. Fortunately, Mini.

Tool Partition Wizard has an ability to recover RAW partition data. As a piece of third- party software, it is reliable and professional to manage your disk and partition. Moreover, this partition software is compatible with some operating systems including Windows Vista/XP/7/8/8.

Among powerful features of Mini. Tool Partition Wizard, a feature called . Its Free Edition can only be used to scan lost partitions but not to recover partitions. Then, go to its main interface. You can also select the target disk, and click . From the following figure, you know Mini.

Tool Partition Wizard provides three scanning range settings. Full Disk: This mode is suitable to scan the entire disk. Unallocated Space: It only scans the free space on your selected disk. Specified Range: It is useful to scan specified sectors. Between them, the former can restore lost/deleted partitions which are continuous and the latter is designed to scan each sector of the scanning range you have chosen. When double clicking on this partition which is in RAW file system in Disk Management, and then all partition data will be displayed. Please check whether the files are your needs.

Here you can preview all RAW partitions will be converted to NTFS. Finally, hit . So please use Mini.

Tool Partition Wizard to assign a drive letter with . If you are also having the same issue, download Mini. Tool Partition Wizard Free Edition to check whether your partitions can be found or directly purchase it’s Professional Edition to do partition recovery to convert RAW to NTFS file system. Here maybe you ask: there are many files saved on your disk , but formatting will lead to data loss, so could the partition data be recovered firstly and then start to format? Here Mini. Tool Solution Ltd. Otherwise, the chance of data recovery is slim. And then select .

Then follow the pop- up wizard to recover data from RAW drive. Here is a related article Recover Data from RAW File System, RAW Partition and RAW Drive Efficiently.

Follow the four ways below now. Usually, In Disk Management, you probably right click on the RAW drive and select . Sometimes you can do this successfully, however, sometimes an error message saying . If you right click it to format your RAW partition on external hard drive, sometimes you may fail with .

Try to convert RAW to NTFS with CMD. Run Command Prompt as Administrator, and then enter the following commands (each ends up with Enter key.) to do external hard drive raw format fix. This partition manager can do the conversion between NTFS and FAT3. In the main interface of Partition Wizard, you will find the RAW drive shows .

Please click . During the process, it is allowed to set partition label for the target partition. Here partition I also shows . Usually when opening diskpart to start the check, . Sometimes in Disk Management, your partition shows RAW file system. But in fact, it is not recognized as RAW by diskpart due to some unknown reasons.

So you can try this solution in Windows 7/8/1. When launching it to the main interface, perhaps your partition which shows RAW in Disk Management shows NTFS files system here.

At this time, you can reboot your computer. If the partition is still normal in Partition Wizard, it is most likely the key file system information is corrupted. So please check and fix file system now. Here select . And then click . If you are interested in this tool, please download it now for a free try.

If all ways are not working, it is most likely that your external hard drive is damaged physically. So in this case, you only need to replace this disk in Windows 7/8/1. Once your external hard drive becomes RAW, the most important thing should be to convert RAW to NTFS. This post introduces you three solutions in detail and three possible methods to get RAW data back and recover RAW partition to NTFS. Please try them according to your need.

Hope you can solve RAW issue successfully. If you have any suggestion or question, welcome to leave a comment below or email us via support@minitool.